The Idler Of Belt Conveyor
Applicable equipment： Belt conveyor
Introduction
Accessories profile:
The idler is used to support the conveyor belt and the material on it and make it run stably. Troughing idlers are used for conveying bulk materials and parallel idlers are used for conveying finished articles and supporting lower branch conveyor belts. In order to prevent conveyor belt runaway and affect the operation, training idlers will be set every 10 sets. Impact idler shall be installed when the height of blanking is between 800-1200mm or the weight of a single piece of conveying material exceeds 50Kg.. The spacing between cushioning idlers is generally 400-600mm, depending on the working conditions.
Performance features:
1.Before leaving the factory, quality inspection must be conducted in the quality inspection department to ensure the quality of each manufactured product;
2.The use of advanced processing technology and high-quality materials can reduce the investment cost of wear, and can also reduce the loss caused by the frequent replacement of accessories, greatly improve the rate of return on investment;
3.Compared with the similar products, it has the advantages of good comprehensive performance, high reliability, strong wear resistance, low price and so on.
The idler is used to support the conveyor belt and the material on it and make it run stably. Troughing idlers are used for conveying bulk materials and parallel idlers are used for conveying finished articles and supporting lower branch conveyor belts. In order to prevent conveyor belt runaway and affect the operation, training idlers will be set every 10 sets. Impact idler shall be installed when the height of blanking is between 800-1200mm or the weight of a single piece of conveying material exceeds 50Kg.. The spacing between cushioning idlers is generally 400-600mm, depending on the working conditions.
Performance features:
1.Before leaving the factory, quality inspection must be conducted in the quality inspection department to ensure the quality of each manufactured product;
2.The use of advanced processing technology and high-quality materials can reduce the investment cost of wear, and can also reduce the loss caused by the frequent replacement of accessories, greatly improve the rate of return on investment;
3.Compared with the similar products, it has the advantages of good comprehensive performance, high reliability, strong wear resistance, low price and so on.
