Jaw Crusher
Max feed size（mm） : 120-1020
Capacity （t/h） : 1-800
Introduction
Product features: (high crushing ratio, high efficiency, large amount of processing, low operating costs, convenient adjustment, economical use).
There are important improvements in the structural form of the components, regulation, and so on. It’s different from the traditional jaw crusher.
There are important improvements in the structural form of the components, regulation, and so on. It’s different from the traditional jaw crusher.
The scope of application is wide. This jaw crusher is widely used in the mine industry, smelting, building materials, roads, railways, water industry, chemical industry, etc. and is especially suited for a stationary crushing production line and a mobile crushing station.
Advantage
High crushing efficiency
Through the optimization of the structure of the crushing cavity and the parameter of the trajectory of motion of mobile warfare, to have a higher efficiency of crushing at the same power consumption.
Good stability
Through optimization of the integral design of this equipment and the balance part, to obtain a large improvement in the oscillation. Comparing with the jaw crushers of the same specification, to have a higher stability.
Simple operation, convenient maintenance
The advanced edge guard plate bolt fixing system makes this type of model faster when replacing the edge guard plate; a reasonable machine structure makes this type of model more convenient when adjusting the size of the discharge opening and when replacing the elbow, which can effectively shorten the operation. Maintenance time.
low maintenance costs
High wear-resistant plates and protection plates have a longer service life and save the cost of post-maintenance maintenance Widely used for crushing process of various metal ores and non-metal ores
Through optimization of the integral design of this equipment and the balance part, to obtain a large improvement in the oscillation. Comparing with the jaw crushers of the same specification, to have a higher stability.
Technical Data
| Model |
Feeding Opening Size (mm) |
Max feed size （мм） |
Discharging range （мм） |
Capacity （т / h） |
Power (кw) |
Weight (t) |
Dimensions (mm) (LxWxH) |
| PE-150×250 | 150×250 | 120 | 10-40 | 1-4 | 5.5 | 1.1 | 880×750×940 |
| PE-150×750 | 150×750 | 120 | 10-40 | 10-20 | 15 | 2.2 | 1260×1400×900 |
| PE-250×400 | 250×400 | 210 | 20-60 | 5-20 | 15 | 3 | 1300×1090×1270 |
| PE-400×600 | 400×600 | 340 | 40-100 | 16-60 | 30 | 7 | 1730×1730×1630 |
| PE-500×750 | 500×750 | 425 | 50-100 | 40-110 | 55 | 12 | 1980×2080×1870 |
| PE-600×900 | 600×900 | 500 | 65-160 | 90-180 | 55 | 17 | 2190×2206×2300 |
| PE-750×1060 | 750×1060 | 630 | 80-140 | 110-320 | 110 | 29 | 2660×2430×2800 |
| PE-800×1060 | 800×1060 | 640 | 80-150 | 130-330 | 110 | 29.8 | 2710×2430×2800 |
| PE-900×1060 | 900×1060 | 685 | 80-150 | 230-390 | 110 | 33 | 2870×2420×2940 |
| PE-900×1200 | 900×1200 | 750 | 95-165 | 220-450 | 110-132 | 58 | 3380×2870×3330 |
| PE-1000×1200 | 1000×1200 | 850 | 195-265 | 315-500 | 110-160 | 69 | 3480×2876×3330 |
| PE-1200×1500 | 1200×1500 | 1020 | 150-300 | 400-800 | 160-220 | 100.9 | 4200×3300×3500 |
| PEX250×750 | 250×750 | 200 | 15-60 | 13-35 | 30 | 6.5 | 1380×1750×1540 |
| PEX250×1000 | 250×1000 | 200 | 15-60 | 16-52 | 37 | 7 | 1560×1950×1390 |
| PEX250×1200 | 250×1200 | 200 | 15-60 | 20-60 | 45 | 9.7 | 2140×2096×1500 |
| PEX300×1300 | 300×1300 | 240 | 20-90 | 20-100 | 55 | 15.6 | 2720×2210×1600 |
