Close modal

Granite / Basalt Crushing Processing Line

TPH : 200
Material : Basalt
Notice:When the feeding size ≤ 150mm, the material directly into the cone crusher, without the previous crushing.

Processing introduction:200TPH Granite / Basalt Crushing Processing Equipment.Stone from the mountain blasting down, self loader truck feed the stone less than 600mm into the vibrating feeder, vibrating feeder to evenly feed the stone into jaw crusher.The jaw crusher carries out the first crushing of the stone, discharged stone from the jaw crusher is about ≤150mm, then the material is sent to the high efficiency hydraulic cone crusher through the vibrating feeder for the secondary crushing, and the material is classified and sifted through the circular vibrating screen. The material larger than 40mm is returned to cone crusher and broken again, The material less than 40mm is transported to the shaping machine by the belt conveyor.After shaping, the finished product is sorted through a circular vibrating screen and transported to the finished product area by a belt conveyor.
(1)Advanced crushing design; high production efficiency, good shape of finished products;

(2)The multi-cylinder hydraulic cone crusher has an advanced structure: the main shaft is fixed and the eccentric sleeve rotates around the main shaft; it greatly improves the pressure of the main shaft. With the same external dimensions, it can withstand greater crushing power. With reasonable design of the eccentricity, cavity type and motion parameters, it greatly improves production capacity and work efficiency;

(3)The VSI sand making machine is used to shape the finished materials, so that the finished material has uniform size, good shape and reasonable grading, which can meet the requirements of the aggregate used in various fields of the construction industry;

(4)The whole production process is equipped with multiple buffer silos to ensure that the normal production of other equipment is not affected when any of the machines is shut down for maintenance;

(5)For main equipment, the bearings are of SKF brand; the motors are well-known brands such as Siemens, and the wear parts are made of high-manganese steel. The whole production line is with high operating rate and low failure rate, which greatly reduces the maintenance cost and labor intensity.
Technical Data
Item Model Quantity
Vibrating feeder GZD1300*4900 1
Jaw crusher PE750*1060 1
Vibrating feeder GZG110-4 1
High efficiency hydraulic cone crusher HPT300 1
Circular vibrating screen 3YZS2460 1

Request For Quotation