Limestone Crushing Processing Line
TPH : 300-400
Material : Limestone
Introduction
Processing introduction：300-400TPH Limestone Crushing Processing Equipment.Stone from the mountain blasting down, self loader truck feed the stone less than 1020mm into the vibrating feeder, vibrating feeder to evenly feed the stone into jaw crusher.
The jaw crusher carries out the first crushing of the stone, discharged stone from the jaw crusher is about 150mm-300mm, then the material is sent to the Impact crusher through the vibrating feeder for the secondary crushing, and the material is classified and sifted through the circular vibrating screen.
The material larger than the finished product is returned to impact crusher and broken again, and the finished product is transported to the finished product area by the belt conveyor.
Notice：When the feeding size ≤ 300mm, the material directly into the european impact, without the previous crushing.
The jaw crusher carries out the first crushing of the stone, discharged stone from the jaw crusher is about 150mm-300mm, then the material is sent to the Impact crusher through the vibrating feeder for the secondary crushing, and the material is classified and sifted through the circular vibrating screen.
The material larger than the finished product is returned to impact crusher and broken again, and the finished product is transported to the finished product area by the belt conveyor.
Notice：When the feeding size ≤ 300mm, the material directly into the european impact, without the previous crushing.
Advantage
(1) simple process and Small footprint;
(2) large crushing ratio of system equipment, high production efficiency and low operation cost;
(3) the finished products are of uniform grade, good shape and reasonable grade distribution, which can meet the requirements of aggregate used in various fields of the construction industry;
(4) The wearing parts of the equipment are made of wear-resistant materials, with long service life and low maintenance cost.
(2) large crushing ratio of system equipment, high production efficiency and low operation cost;
(3) the finished products are of uniform grade, good shape and reasonable grade distribution, which can meet the requirements of aggregate used in various fields of the construction industry;
(4) The wearing parts of the equipment are made of wear-resistant materials, with long service life and low maintenance cost.
Technical Data
| Item | Model | Quantity |
| Vibrating feeder | GZD1500×6000 | 1 |
| Jaw crusher | PE-1200×1500 | 1 |
| European Impact crusher | PFW1318 | 2 |
| Vibrating screen | 3YZS2460 | 2 |
